Application
Heating elements for oem & equipment builders
Machine builders specifying heaters into their own product — repeatable parts, stable part numbers, scheduled call-off against a blanket order.
What usually goes wrong
Supply continuity. An OEM cannot re-qualify a heater every year, so what matters is that the same drawing produces the same part on the tenth order as on the first.
Typically specified
What this sector orders
- Any series to drawing
- Blanket orders with scheduled call-off
- Laser-marked part numbers
Relevant families
- Air & Oven Heating Elements
- Single-Head Cartridge Heaters
- Water & Boiler Immersion Heaters
- Coil & Steam Coil Tubes
Every application in this sector still comes down to the same six inputs — medium, temperature, watt density, sheath alloy, mounting and supply. Send those and we will size against them rather than guess from the part number.
Answered within 1 business day.
Suggested series
Where most people start
JGQTo drawingJGQ Tubular Air-Heating Element
Six bend geometries, 0.25–3.0 kW, 36 V to 380 V
- Max temp
- 572 °F
- Power
- 0.25–3 kW
- Part numbers
- 24
JGD-HTo drawingHigh Watt Density Cartridge Heater
Swaged construction for hot runners, dies and platens
- Max temp
- 1382 °F
- Power
- 0.05–3 kW
- Part numbers
- 9
JGD-MTo drawingMedium & Low Density Cartridge Heater
Forgiving of bore fit, longer life in general fixtures
- Max temp
- 1022 °F
- Power
- 0.05–2 kW
- Part numbers
- 8
JGD-TTo drawingThreaded & Right-Angle Cartridge Heater
Screws into a tapped boss; exits sideways where clearance is short
- Max temp
- 1202 °F
- Power
- 0.05–2 kW
- Part numbers
- 8
JGSTo drawingJGS Boiler & Water Immersion Heater
Flange or threaded mount, sealed for 0.8–4 MPa
- Max temp
- 320 °F
- Power
- 1–45 kW
- Part numbers
- 13
JGCTo drawingSteam & Process Coil Tube
Helical and flat-spiral coils wound to your vessel
- Max temp
- 572 °F
- Power
- —
- Part numbers
- 8